2.4 Aeroflex FamilyAEROFIX
PIPE HANGER AND SUPPORTER WITH SELF-SEALING TAPE
Aerofix is a polymeric rigid foam hanger with rubber foam tape inner-lining, which absorbs vibration of operating pipelines. High density rigid foam makes Aerofix superior for supporting metal pipe weight. The outer cover consists of flame retarding rubber tape, which seals the hanger completely after installation in order to prevent moisture penetration and condensation problems More Detail >>
INSULATING FITTING COVERS
Aerofit insulating Fitting Covers are designed for insulation warm or cold piping fittings and elbows without the need to field-fabricate into particular shapes. It help to save time and installation costs. Aerofit is very good in weather resistance without any protective cover required for outdoor application. More Detail >>
FOR SQUARE DUCT CONNECTIONS
Aeroflange is a self-adhesive flange cover for square duct connection. It is made of the material as AEROFLEX thermal insulation the features the same excellent physical and technical insulation properties. It is the all-in-one ducting work solution that provides clean and fast installation with professional appearance.
- • Clean and time saving installation
- • The same excellent insulation properties as AEROFLEX
- • Professional look and neat appearance More Detail >>
RUBBER LOAD SUPPORTER FOR AIR-CONDENSING UNITS
AEROPAD anti-vibration Rubber pad will
- • Reduce noise of machines
- • Stand outdoor applications
- • Reduce vibration to the floor
- • Is available in 1 meter length for universal use
- • Good w eat her resistance
- • Al so available in small pieces with a hole for bolts
- • Not absorb water
RUBBER LOAD SUPPORTER FOR AIR-CONDENSING UNITS
AEROSTAND made from natural rubber blended with EPDM synthetic rubber is a load supporter especially designed for air- condensing units. This stand possesses both high compressive strength and good weathering resistance. AEROSTAND can withstand loads of up to 60 kgs. per piece. Easy to install with bolt & nut prefixed. Very effective in reducing vibration and noise level. Reduced vibration helps prolong service life of the air condensing unit
THE HIGH QUALITY SELF ADHESIVE INSULATION FOAM TAPE
AEROTAPE is the flexible and self-adhesive insulation foam tope which is mode from the some elastomeric material as AEROFLEX Closed Cell Insulation. Ideal for wrapping hot or cold pipings and fittings. Energy saving and very easy to use. Excellent for preventing condensation problems. Designed specially for retarding heat loss in hot pipings and preventing heat gain or frost formation on cold, chilled water pipings or refrigeration lines. Adheres firmly to all metals. No problem of delamination. AEROTAPE is specially coated with selected acrylic pressure sensitive adhesive providing long service life.
Self-adhesive rubber tape for insulation tubes and sheets joints
Self-adhesive EPDM Elastomeric Tape for extra protection against humidity
(0.6mm thick x 75, 50, 40, 30, 25 mm wide x 25m long)
PIPE INSULATING CORK TAPE
EVERSEAL Cork Tape is designed to insulate all kinds of cold pipes including residential and automotive air-conditioners, freezers and refrigerators. It helps to prevent condensation problems and energy loss in cold and hot piping. Everseal can be applied as effective sound dampening and gasket materials. Everseal insulation tape sticks to all kinds of dry metals. It seals tightly without drying. It is flexible and does not shrink nor melt within the service temperature of -20 °F (-29 °C) to + 200 °F (+ 93 °C ).
ADHESIVE FOR AEROFLEX INSULATION
AEROSEAL is a Modified Neoprene Contact Adhesive specially formulated for bonding Aeroflex Insulating Materials firmly together. Also, ideal for use with other materials like Metal (painted/ unpainted ), Cork Board. Polyurethane Foam Rigid PVC’ Sheet, Formica, and Melamine Board and Rubber Sheet. The high water vapor resistance and good weathering properties of AEROSEAL can prevent water or moisture from penetrating through the joining points. AEROSEAL is able to form a strong, firm and permanent bonding between the applied materials providing long lasting service.
POLYCHLOROPRENE CONTACT ADHESIVE FOAM AND FIBERGLASS INSULATION ONTO METAL SHEET
Aerobond is a modified Polychloroprene Contact Adhesive specially formulated for attaching elastomeric foam insulation (such as Aeroflex & Aerocel) and fiberglass insulation onto metal sheets used in air ducting system. The strong bonding strength of Aerobond can easily hold up 4 kgs./m2 of insulation materials onto metal sheets at temperature of up to 93°C.
PURE ACRYLIC EMULSION PAINT FOR AEROFLEX INSULATION
Aerocoat is a water based paint formulated with selected pure acrylic emulsion mixed with other special chemicals. Excellent for coating especially onto Aeroflex Insulation surfaces giving greater protection against ultraviolet rays or other adverse weathering conditions. Having elongation properties of more than 400% and with good adhesion promotor, AEROCOAT can stay very firmly and permanently to the coated surface without any problems of peeling . Its superb flexibility ensures no cracking even if the coated insulation surface is squeezed or compressed. With additional characteristics including fungus resistance, AEROCOAT is an ideal quality protective paint which can perform very efficiently both as decorative and protective insulation coating. Whether coated indoor or outdoor, AEROCOAT will be able to provide a smoothing aesthetic appearance while acting as a durable protective shield which can last for more than 10 years. Available .in shades’ of ‘white, blue green and black. AEROCOAT can be painted onto pipe Insulation surfaces giving easy Identification of the different Pipe functions.
THE LASTEST INNOVATION IN WALL TYPE SUPPORT FOR CONDENSING UNITS
Made of pressed electro- galvanized metal sheet , with extra corrosion proof epoxy powder coating. This enables the bracket to be an all weather resistant product. Vibration is kept at a minimum by use of rubber pads included in the set. Easy to install with slide adjustment mechanism for any model of residential Air-condensing unit. 2 model s with loading capacities of max. 60 Kgs. & 80 kgs.
ALUTAPE is a specially formulated solvent base pressure sensitive acrylic adhesive aluminum foil tape. Excellent for use as vapor sealing of fiberglass duct boards and sheet metal ducts. Ideal for use as masking material or for sealing purposes on any dry clean surfaces.
ALUMINIUM SOFT JACKETING is a special product for insulation surface protection. The outer surface is made of aluminium foil covered with 4 layers of Protape, making it excellent for UV resistance. The appearance is neat and smooth with excellent durability. It’s easy to install with time and costs saving. The soft jacketing comes with adhesive backing and can be pressed firmly on the insulation surface. It can also be fabricated into irregular shapes to meet various demands.
Protape Soft Jacketing is used to covered insulation surface with following advantages :
- • Prevent scratches and other external damages
- • Good resistance to sharp objects
- • Prevent water and moisture penetration
- • Easy to install with time and costs saving
- • Easy to install with adhesive backing
- • Can be fabricated into irregular shapes
- • Easy to clean